This firmware is designed for the ARM processor on Minimig 1.1 board. This firmware is pack-ported from the Minimig clone used on the Altera DE1 development board.
Firmware offer following news compared to the original:
sophisticated look of the menus;
the ability to save / load up to 5 configuration files;
possibility of loading different FPGA core file (*.bin);
better menu control via joystick (page wide scroll at Joy left/right).
To update the firmware from the original Yaqube (YQ100818) version, use "firmwareYQ.upg" file.
If for some reason the update failed, you need to upload the .BIN firmware file to the ARM processor using USB connection and the Atmel SAM-BA/SAM-PROG tool. A closer description in how to handle the USB program procedure will follow if required.
Thank MMrobinsonb5 for experienced advice and boing4000 for his patience during testing.
Great stuff! I will try and find time to flash and test tonight.