Minimig Discussion Forum

Discussing the Open Source FPGA Amiga Project
It is currently Sun Sep 24, 2017 4:52 am

All times are UTC




Post new topic Reply to topic  [ 196 posts ]  Go to page Previous  1 ... 16, 17, 18, 19, 20
Author Message
 Post subject: Re: MiST - New Minimig
PostPosted: Thu Aug 14, 2014 1:11 pm 
Offline

Joined: Tue Nov 09, 2010 3:10 pm
Posts: 316
Hi jezry,

can you please describe what you are seeing in more detail?
- Do you see flashing on the screen or is one of the LED lights on the board flashing?
- What files do you have on your SD card?
- Do you have any chance to connect a serial cable to the board, either a true serial or a USB-serial adapter? This would help a lot, since the control CPU puts debug messages on the serial console (the settings for the COM port are 115200 / 8 / N / 1).

Cheers!

_________________
** my minimig builds: http://somuch.guru/ **


Top
 Profile  
 
 Post subject: Re: MiST - New Minimig
PostPosted: Thu Aug 21, 2014 5:12 pm 
Offline

Joined: Wed Aug 06, 2014 7:53 am
Posts: 7
Thanks for your answers :D After emailing with Lotharek i sent the Mist back to him for checking :)


Top
 Profile  
 
 Post subject: Re: MiST - New Minimig
PostPosted: Thu Aug 21, 2014 5:12 pm 
Offline

Joined: Sun Jul 07, 2013 2:13 pm
Posts: 61
Ok then, hope it turns out ok :)


Top
 Profile  
 
 Post subject: Re: MiST - New Minimig
PostPosted: Mon Sep 22, 2014 11:19 pm 
Offline

Joined: Tue Sep 16, 2014 2:45 am
Posts: 1
I have WHDLoad and MiST but I'm having trouble getting a setup that works with a virtual HDD (hdf file). Does anyone having a working configuration? What setup should I use (Kickstart, etc.)? I used WinUAE to prepare the HDF but I couldn't get it to boot once I had it on the SD card and in the MiST.


Top
 Profile  
 
 Post subject: Re: MiST - New Minimig
PostPosted: Tue Sep 23, 2014 11:02 am 
Offline

Joined: Mon Dec 01, 2008 9:58 pm
Posts: 1568
Location: .de
At least the Kickstart need to be 2.05 (37.300, better 37.350) or 3.1 to autoboot via simulated GAYLE chip and ROM internal scsi.device.
Also IDE Support and selected HDF must be enabled (this is for MinimigV1 board, I do not know the MiST OSD).

_________________
_____________________________
JMP $00000BED ; will guru-meditation until next morning


Top
 Profile  
 
 Post subject: Re: MiST - New Minimig
PostPosted: Tue Sep 23, 2014 11:34 am 
Offline

Joined: Tue Nov 09, 2010 3:10 pm
Posts: 316
Hi palamzy,

you didn't describe what the problem is. Do you get an error, does minimig detect the hard rive at all or does it go directly to the "insert floppy" screen?

Like boing4000 said, it's best to use kick3.1, rememeber to enable the IDE controller and select the hdf file you made with WinUAE. Did you enable RDB for your .hdf in WinUAE?
You could also try disabling fastRAM and only add chip and slow. Do you have a serial cable or a serial-to-usb adapter, so you could see the debug output on the serial console?

_________________
** my minimig builds: http://somuch.guru/ **


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 196 posts ]  Go to page Previous  1 ... 16, 17, 18, 19, 20

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Translated by Xaphos © 2007, 2008, 2009 phpBB.fr