Minimig Discussion Forum
http://minimig.net/

FPGA Replay Case
http://minimig.net/viewtopic.php?f=13&t=389
Page 1 of 2

Author:  Wizard66 [ Sat Mar 19, 2011 2:43 pm ]
Post subject:  FPGA Replay Case

Hi guys,

I have decided to design a housing for the FPGAArcade Replay.
Some of you maybe remember I did a few runs of minimig housings.
There will be two kit versions of cases including spacers and bolts.
The cases will be made from Plexiglas just like the minimig cases.

Versions:

1. For the FPGAArcade Replay mainboard.

2. One for the FPGAArcade Replay Including the 060 daughterboard.
This version will include a sunroof/hole for the processor so the heat sink can vent out the top op the case (only the square heat sink will be supported)



********* ********** UPDATE ********* **********

The first prototype for the FPGAARCADE is ready ;-))

This is the version for use with the FPGAARCADE mainboard only (so the mainboard without the daughterboard from Yacube)

There are two set options:
Set 1 AMI: Amiga Set Complete set including spacers and bolds Including Amiga Text and boingball logo (see picture nr.1).
Set 2 UNI: Universal set NONE logo's Complete set including spacers and bolds (see picture nr.2)

I can supply more logo's in the future but we will see.

If you are interested in one of this sets let me know I will keep a list of peoples interested.
The minimal units I have to get is 25 before the production can take place.
If The 25 units are confirmed I will e-mail to ALL for payment then the production will start (I WILL DELIVER as I did in the past just look up the minimig cases thread)

Cost:
Set UNI Universal set E 28,50 shipment E 12,00
Set AMI Amiga Set E 36,00 shipment E 12,00

The case design including Yacube’s daughterboard is not begun yet because I don’t have any measurements.
I will contact MikeJ or Yaqube if there is progress in rerouting the daughterboard for the CPU placement on the new daughterboard.

Update 16-5-2011

Okey boys and girls,

After some e-mail swapping between MikeJ and me there are some changes here.
MikeJ has ask me if I want to use his original fpgaarcade logo on the case's (let me think ;-) YEEEEEEEEEEEES !!!! )
So here is a update from the case on drawing, the quality of the product will be the same as the pictures on page one, so only the engraving will change.

The picture is for the amiga version the Universal version is the same like this without the amiga logo, DUhu..

Final Design: http://eab.abime.net/attachment.php?att ... 1305544905

The 060 daughterboard version will also include this logo and some other stuff ;-) Daughterboard version pending….

*** LIST of peoples who want a Set***

1. 1 x Set AMI Maffoo @ Amiga.org
2. 1 x Set AMI Darrin @ Amiga.org
3. 1 x Set AMI gxenakis @ Minimig.net
4. Set
5. Set
6. Set
7. Set
8. Set
9. Set
10. Set
11. Set
12. Set
13. Set
14. Set
15. Set
16. Set
17. Set
18. Set
19. Set
20. Set
21. Set
22. Set
23. Set
24. Set
25. Set

I Hope you all like this version ;-)

HIRES PICTURES MEGAUPLOAD, PM me if the link is dead
http://www.megaupload.com/?d=ZOAKCUQ3

Picture 1 http://www.amiga.org/forums/attachment.php?attachmentid=1318&d=1305049451
Picture 2 http://www.amiga.org/forums/attachment.php?attachmentid=1319&d=1305049472

Author:  Darrin [ Sun Mar 20, 2011 10:29 pm ]
Post subject:  Re: FPGA Replay Case

I look forward to seeing some pics. :)

Author:  espskog [ Thu Apr 07, 2011 12:52 pm ]
Post subject:  Re: FPGA Replay Case

What will the price be ? You get full 17x17 cm mini itx cases (just the case) for $20 on ebay and I just ordered one
as I need a case ASAP for the replayboard which just sits there in its antistatic bag...waiting to be housed :)

If you make a cabinet, can you add "walls" to it ? Make it as small as possible but with the option to insert the daughterboard.
Then we can Velcro the unit on the back of a monitor...that'd be nice :-)

Author:  Wizard66 [ Mon May 09, 2011 2:18 pm ]
Post subject:  Re: FPGA Replay Case

Today the prototype has arrived.
Now I have to measure the spacers and order the right bolds.
The Plexiglas is 3mm thick, so nice and strong.
I will display the pictures in a few day’s
Production run @ the company has to be @least 25 unit’s.
Prize will follow.

Author:  Wizard66 [ Tue May 10, 2011 6:14 pm ]
Post subject:  Re: FPGA Replay Case

UPDATE:
FPGAARCADE Base verion ready pictures first post.

Author:  gxenakis [ Tue May 10, 2011 8:53 pm ]
Post subject:  Re: FPGA Replay Case

looks great!!! +1 for me :D

Author:  Wizard66 [ Thu May 12, 2011 9:57 am ]
Post subject:  Re: FPGA Replay Case

gxenakis wrote:
looks great!!! +1 for me :D


hi gxenakis, please select the version you want UNIversal Or AMIga

Author:  gxenakis [ Sun May 15, 2011 8:46 pm ]
Post subject:  Re: FPGA Replay Case

do you need an answer for that? AMIGA!!!!!!!

Author:  Wizard66 [ Mon May 16, 2011 11:40 am ]
Post subject:  Re: FPGA Replay Case

Update 16-5-2011

Okey boys and girls,

After some e-mail swapping between MikeJ and me there are some changes here.
MikeJ has ask me if I want to use his original fpgaarcade logo on the case's (let me think ;-) YEEEEEEEEEEEES !!!! )
So here is a update from the case on drawing, the quality of the product will be the same as the pictures on page one, so only the engraving will change.

The picture is for the amiga version the Universal version is the same like this without the amiga logo, DUhu..

The 060 daughterboard version will also include this logo and some other stuff ;-) Daughterboard version pending….

http://eab.abime.net/attachment.php?att ... 1305544905

Author:  gxenakis [ Mon May 16, 2011 5:32 pm ]
Post subject:  Re: FPGA Replay Case

looks great!!!

Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/